Advanced learning system

642-832 learning materials have a variety of self-learning and self-assessment functions to test learning outcomes. 642-832 learning material is like a tutor, not only gives you a lot of knowledge, but also gives you a new set of learning methods. 642-832 learning material is also equipped with a simulated examination system that simulates the real exam environment so that you can check your progress at any time. At the same time, 642-832 study material also has a timekeeping function that allows you to be cautious and keep your own speed while you are practicing, so as to avoid the situation that you can't finish all the questions during the exam. With 642-832 learning materials, you only need to spend half your money to get several times better service than others.

Free trial downloading before purchase

642-832 study engine is very attentive to provide a demo for all customers who concerned about our products, whose purpose is to allow customers to understand our product content and how to use the software before buying. Many students suspect that if 642-832 learning material is really so magical? Does it really take only 20-30 hours to pass such a difficult certification exam successfully? It is no exaggeration to say that if you purchase 642-832 exam questions and review it as required, you will be able to successfully pass the exam. And if you still don't believe what we are saying, you can log on our platform right now and get a trial version of 642-832 study engine for free to experience the magic of it. Of course, if you encounter any problems during free trialing, feel free to contact us and we will help you to solve all problems.

As a wise person, it is better to choose our 642-832 study material without any doubts. Due to the high quality and 642-832 accurate questions & answers, many people have passed their actual test with the help of our products. Now, quickly download 642-832 free demo for try. You will get 100% pass with our verified 642-832 training guide.

DOWNLOAD DEMO

Intimate use mode

All exam materials in 642-832 learning materials contain PDF, APP, and PC formats. They have the same questions and answers but with different using methods. If you like to take notes randomly according to your own habits while studying, we recommend that you use the PDF format. You can print all the materials in 642-832 study engine to paper. Then you can sketch on the paper and mark the focus with different colored pens. This will be helpful for you to review the content of the materials. If you are busy with work and can't afford a lot of spare time to review, 642-832 exam questions also prepare an APP version for you. The APP version provide you with mock exams, time-limited exams, and online error correction and let you can review on any electronic device. At the same time, for any version, we do not limit the number of downloads and the number of concurrent users, you can even buy 642-832 learning materials together with your friends, which undoubtedly saves you a lot of overhead.

Cisco Troubleshooting and Maintaining Cisco IP Switched Networks (TSHOOT) Sample Questions:

1. The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client
1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network
addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and
device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241
address.
Use the supported commands to isolated the cause of this fault and answer the following questions.
The fault condition is related to which technology?


Client is unable to ping IP 209.65.200.241

A) NTP
B) Switch-to-Switch Connectivity
C) Access Vlans
D) Switch Virtual Interface
E) VLAN ACL / Port ACL
F) Port Security

2. The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.
Use the supported commands to isolated the cause of this fault and answer the following questions.
The fault condition is related to which technology?

Client 1 is unable to ping IP 209.65.200.241

A) Under the global configuration mode enter no vlan filter test1 vlan-list 10 command.
B) Under the global configuration mode enter no access-map vlan 10 command.
C) Under the global configuration mode enter no vlan access-map test1 10 command.
D) Under the global configuration mode enter no access-list 10 command.

3. The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, and FHRP services, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.
Use the supported commands to isolated the cause of this fault and answer the following questions.
What is the solution to the fault condition?

A) In Configuration mode, using the interface port-channel 23, port-channel, then configure switchport trunk allowed vlan none followed by switchport trunk allowed vlan 10,20,200 commands.
B) In Configuration mode, using the interface port-channel 23 command, then configure switchport trunk allowed vlan none followed by switchport trunk allowed vlan 20,200 commands.
C) In Configuration mode, using the interface port-channel 13, port-channel 23, then configure switchport trunk none allowed vlan none followed by switchport trunk allowed vlan 10,200 commands.
D) In Configuration mode, using the interface port-channel 13 command, then configure switchport trunk allowed vlan none followed by switchport trunk allowed vlan 20,200 commands.

4. You enabled CDP on two Cisco Routers which are connected to each other. The Line and Protocol status for the interfaces on both routers show as UP but the routers do not see each other a CDP neighbors. Which layer of the OSI model does the problem most likely exist?

A) Physical
B) Application
C) Session
D) Network
E) Data-Link

5. Topic 13, Ticket 11 : IPV6 OSPF
Topology Overview (Actual Troubleshooting lab design is for below network design)
Client Should have IP 10.2.1.3
EIGRP 100 is running between switch DSW1 & DSW2
OSPF (Process ID 1) is running between R1, R2, R3, R4
Network of OSPF is redistributed in EIGRP
BGP 65001 is configured on R1 with Webserver cloud AS 65002
HSRP is running between DSW1 & DSW2 Switches The company has created the test bed shown in the layer 2 and layer 3 topology exhibits. This network consists of four routers, two layer 3 switches and two layer 2 switches. In the IPv4 layer 3 topology, R1, R2, R3, and R4 are running OSPF with an OSPF process
number 1.
DSW1, DSW2 and R4 are running EIGRP with an AS of 10. Redistribution is enabled where necessary.
R1 is running a BGP AS with a number of 65001. This AS has an eBGP connection to AS 65002 in the
ISP's network. Because the company's address space is in the private range.
R1 is also providing NAT translations between the inside (10.1.0.0/16 & 10.2.0.0/16) networks and outside
(209.65.0.0/24) network.
ASW1 and ASW2 are layer 2 switches.
NTP is enabled on all devices with 209.65.200.226 serving as the master clock source.
The client workstations receive their IP address and default gateway via R4's DHCP server.
The default gateway address of 10.2.1.254 is the IP address of HSRP group 10 which is running on DSW1
and DSW2.
In the IPv6 layer 3 topology R1, R2, and R3 are running OSPFv3 with an OSPF process number 6.
DSW1, DSW2 and R4 are running RIPng process name RIP_ZONE.
The two IPv6 routing domains, OSPF 6 and RIPng are connected via GRE tunnel running over the
underlying IPv4 OSPF domain. Redistrution is enabled where necessary.
Recently the implementation group has been using the test bed to do a `proof-of-concept' on several
implementations. This involved changing the configuration on one or more of the devices. You will be presented with a series of trouble tickets related to issues introduced during these configurations. Note: Although trouble tickets have many similar fault indications, each ticket has its own issue and
solution.
Each ticket has 3 sub questions that need to be answered & topology remains same.
Question-1 Fault is found on which device,
Question-2 Fault condition is related to,
Question-3 What exact problem is seen & what needs to be done for solution

Solutions: