350-401 Questions Prepare with Learning Information! 2024 Regularly updated [Q564-Q587]

350-401 Questions Prepare with Learning Information! 2024 Regularly updated

Get 350-401 Products Practice Material for 350-401 Exam Question Preparation

Cisco 350-401 ENCOR certification exam tests your knowledge and skills in a variety of areas including network infrastructure, security, automation, and virtualization. 350-401 exam covers a wide range of topics such as network design, routing and switching protocols, network security, wireless networking, and network automation. Candidates are expected to have a solid understanding of these topics to pass the exam.

Cisco 350-401 Exam is a comprehensive test that requires a deep understanding of networking concepts and technologies. It consists of multiple-choice and simulation questions that are designed to evaluate the candidate's knowledge, skills, and problem-solving abilities. 350-401 exam is computer-based and can be taken at authorized Pearson VUE testing centers worldwide.

The Cisco 350-401 exam topics of Cisco 350-401 cover a wide range of industry-standard technologies, including Virtual LANs (VLANs), routing protocols (OSPF, BGP, and EIGRP), Quality of Service (QoS), Network Applications and Infrastructure Services, and Network Security. Moreover, the exam also tests candidates' knowledge and understanding of network automation, network programmability, and virtualization technologies such as virtual switching, virtual routing, and overlay networks.

NEW QUESTION # 564
Refer to the exhibit.

Which IP address becomes the next active next hop for 192.168.102.0/24 when 192.168.101.2 fails?

A. 192.168.101.18
B. 192.168.101.6
C. 192.168.101.14
D. 192.168.101.10

Answer: A

NEW QUESTION # 565
Refer to the exhibit. Which IPv6 OSPF network type is applied to interface Fa0/0 of R2 by default?

A. broadcast
B. multipoint
C. Ethernet
D. point-to-point

Answer: A

Explanation:
The Broadcast network type is the default for an OSPF enabled ethernet interface (while Point-to- Point is the default OSPF network type for Serial interface with HDLC and PPP encapsulation).
Reference: https://www.oreilly.com/library/view/cisco-ios-cookbook/0596527225/ch08s15.html

NEW QUESTION # 566
Drag and drop the characteristics from the left onto the routing protocols they describe on the right.

Answer:

Explanation:

Explanation
Diagram Description automatically generated

NEW QUESTION # 567
Refer to the exhibit. An engineer is investigating why guest users are able to access other guest user devices when the users are connected to the customer guest WLAN. What action resolves this issue?

A. implement split tunneling
B. implement Wi-Fi direct policy
C. implement MFP client protection
D. implement P2P blocking

Answer: B

Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-1/configurationguide/b_cg81/b_cg81_chapter_01000110.pdf

NEW QUESTION # 568

Refer to the exhibit An engineer is troubleshooting a newly configured BGP peering that does not establish What is the reason for the failure?

A. A firewall is blocking access to TCP port 179 on the BGP peer 10 255 255.3
B. Mandatory BOP parameters between R1 and 10 255 255 3 are mismatched
C. BGP peer 10 255 255 3 is not configured for peenng wth R1
D. Both BGP pern are configured for passive TCP transport

Answer: A

Explanation:
The exhibit indicates that the BGP peering is not established, which is evident from the "Destination unreachable; gateway or host down" message when attempting to telnet to port 179 on the BGP peer
10.255.255.3 from the R1 router interface lo0 (loopback0). This message typically signifies that a firewall is blocking access to TCP port 179, which is essential for BGP peering.

NEW QUESTION # 569
Refer to the exhibit.

An engineer must allow all users in the 10.2.2.0/24 subnet to access the Internet. To conserve address space the public Interface address of 209 165 201.1 must be used for all external communication. Which command set accomplishes these requirements?
A)

B)

C)

D)

A. Option D
B. Option A
C. Option B
D. Option C

Answer: D

NEW QUESTION # 570
Refer to the exhibit.

A network engineer configures OSPF and reviews the router configuration. Which interface or interface or interface are able to establish OSPF adjacency?

A. only GigabttEthernet0/0
B. Gigabit Ethernet0/0 and GigabitEthemet0/1
C. GigabitEthemet0/1 and GigabitEthernet0/1.40
D. only GigabitEthernet0/1

Answer: D

NEW QUESTION # 571
Refer to the exhibit.

Which configuration allows Customer2 hosts to access the FTP server of Customer1 that has the IP address of
192.168.1.200?

A. ip route vrf Customerl 172.16.1.1 255.255.255.255 172.16.1.1 global
ip route vrf Customer 192.168.1.200 255.255.255.0 192.168.1.1 global
ip route 192.168.1.0 255.255.255.0 VlanlO
ip route 172.16.1.0 255.255.255.0 Vlan20
B. ip route vrf Customerl 172.16.1.0 255.255.255.0 172.16.1.1 Customer2 ip route vrf Customer 192.168.1.200 255.255.255.255 192.168.1.1 Customerl
C. ip route vrf Customerl 172.16.1.0 255.255.255.0 172.16.1.1 Customerl ip route vrf Customer 192.168.1.200 255.255.255.255 192.168.1.1 Customer2
D. ip route vrf Customerl 172.16.1.0 255.255.255.0 172.16.1.1 global
ip route vrf Customer 192.168.1.200 255.255.255.255 192.168.1.1 global
ip route 192.168.1.0 255.255.255.0 VlanlO
ip route 172.16.1.0 255.255.255.0 Vlan20

Answer: D

Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/ip/ip-routing/200158-Configure-Route-Leaking-between-Global-a.h

NEW QUESTION # 572
How do cloud deployments differ from on-prem deployments?

A. Cloud deployments have lower upfront costs than on-premises deployments.
B. Cloud deployments require less frequent upgrades than on-premises deployments.
C. Cloud deployments require longer implementation times than on-premises deployments
D. Cloud deployments are more customizable than on-premises deployments.

Answer: D

NEW QUESTION # 573
Refer to the exhibit.

After an engineer configures an EtherChannel between switch SW1 and switch SW2, this error message is logged on switch SW2.

Based on the output from SW1 and the log message received on Switch SW2, what action should the engineer take to resolve this issue?

A. Connect the configuration error on interface Gi0/1 on switch SW1.
B. Configure the same protocol on the EtherChannel on switch SW1 and SW2.
C. Correct the configuration error on interface Gi0/0 switch SW1.
D. Define the correct port members on the EtherChannel on switch SW1.

Answer: B

Explanation:
In this case, we are using your EtherChannel without a negotiation protocol. As a result, if the opposite switch is not also configured for EtherChannel operation on the respective ports, there is a danger of a switching loop.
The EtherChannel Misconfiguration Guard tries to prevent that loop from occuring by disabling all the ports bundled in the EtherChannel.

NEW QUESTION # 574
Refer the exhibit.

Which router is the designated router on the segment 192.168.0.0/24?

A. Router NewYork because it has a higher router ID
B. Router Chicago because it has a lower router ID
C. This segment has no designated router because it is a p2p network type.
D. This segment has no designated router because it is a nonbroadcast network type.

Answer: B

Explanation:
In OSPF (Open Shortest Path First) networks, the designated router (DR) is elected based on the lowest router ID among all routers on a particular segment. The router ID is a unique identifier for each router, which is usually the highest IP address on the router or can be manually set. Since the exhibit indicates that Router Chicago has a lower router ID, it would be elected as the designated router for the segment 192.168.0.0/24.
References: The concept of the designated router and the election process based on the router ID is covered in the Implementing and Operating Cisco Service Provider Network Core Technologies training materials, specifically in the sections discussing OSPF operations and configurations

NEW QUESTION # 575
Drag and drop the DHCP messages that are exchanged between a client and an AP into the order they are exchanged on the right.

Answer:

Explanation:

Explanation

Table Description automatically generated
There are four messages sent between the DHCP Client and DHCP Server: DHCPDISCOVER, DHCPO FFER, DHCPREQUEST and DHCP This process is often abbreviated as (for Discover, Offer, Request, Acknowledgement).

NEW QUESTION # 576
Drag and drop the characteristics from the left onto the orchestration tools that they describe on the right.

Answer:

Explanation:

Explanation
A picture containing application Description automatically generated

NEW QUESTION # 577

Refer to the exhibit. An engineer attempts to configure a router on a stick to route packets between Clients, Servers, and Printers; however, initial tests show that this configuration is not working. Which command set resolves this issue?

Answer: D

Explanation:
We must reconfigure the IP address after assigning or removing an interface to a VRF. Otherwise that interface does not have an IP address.

NEW QUESTION # 578
Which controller is the single plane of management for Cisco SD-WAN?

A. vManage
B. vBond
C. vSmart
D. vEdge

Answer: A

Explanation:
The primary components for the Cisco SD-WAN solution consist of the vManage network
management system (management plane), the vSmart controller (control plane), the vBond
orchestrator (orchestration plane), and the vEdge router (data plane).
+ vManage - This centralized network management system provides a GUI interface to easily
monitor, configure, and maintain all Cisco SD-WAN devices and links in the underlay and overlay
network.
+ vSmart controller - This software-based component is responsible for the centralized control
plane of the SD-WAN network. It establishes a secure connection to each vEdge router and
distributes routes and policy information via the Overlay Management Protocol (OMP), acting as a
route reflector. It also orchestrates the secure data plane connectivity between the vEdge routers
by distributing crypto key information, allowing for a very scalable, IKE-less architecture.
+ vBond orchestrator - This software-based component performs the initial authentication of
vEdge devices and orchestrates vSmart and vEdge connectivity. It also has an important role in
enabling the communication of devices that sit behind Network Address Translation (NAT).
+ vEdge router - This device, available as either a hardware appliance or software-based router,
sits at a physical site or in the cloud and provides secure data plane connectivity among the sites
over one or more WAN transports. It is responsible for traffic forwarding, security, encryption,
Quality of Service (QoS), routing protocols such as Border Gateway Protocol (BGP) and Open
Shortest Path First (OSPF), and more.
Reference:
2018OCT.pdf

NEW QUESTION # 579
Refer to the exhibit.

An engineer must create a configuration that executes the show run command and then terminates the session when user CCNP legs in. Which configuration change is required''

A. Add the access-class keyword to the aaa authentication command
B. Add the autocommand keyword to the username command
C. Add the access-class keyword to the username command
D. Add the autocommand keyword to the aaa authentication command

Answer: B

NEW QUESTION # 580
Drag and drop the threat defense solutions from the left onto their descriptions on the right.

Answer:

Explanation:

Explanation

NEW QUESTION # 581
Drag and Drop Question
Refer to the exhibit. An engineer must deny HTTP traffic from host A to host B while allowing all other communication between the hosts. Drag and drop the commands into the configuration to achieve these results. Some commands may be used more than once. Not all commands are used.

Answer:

Explanation:

NEW QUESTION # 582
Refer to the exhibit.

Refer to the exhibit. An engineer attempts to configure a trunk between switch sw1 and switch SW2 using DTP, but the trunk does not form. Which command should the engineer apply to switch SW2 to resolve this issue?

A. switchport mode access
B. switchport mode dynamic desirable
C. switchport nonegotiate
D. no switchport

Answer: B

NEW QUESTION # 583
Refer to the exhibit.

A network engineer is configuring OSPF between router R1 and router R2. The engineer must ensure that a DR/BDR election does not occur on the Gigabit Ethernet interfaces in area 0. Which configuration set accomplishes this goal?
A)

B)

C)

D)

A. Option A
B. Option C
C. Option D
D. Option B

Answer: A

Explanation:
Broadcast and Non-Broadcast networks elect DR/BDR while Point-topoint/
multipoint do not elect DR/BDR. Therefore we have to set the two Gi0/0
interfaces to point-to-point or point-to-multipoint network to ensure that a DR/BDR
election does not occur.

NEW QUESTION # 584
Refer to the exhibit.

What is the JSON syntax that is formed from the data?

A. {"Name":"Bob Johnson", "Age": Seventyfive, "Alive": true, "Favorite Foods":["Cereal, "Mustard",
"Onions"]}
B. {'Name':'Bob Johnson', 'Age': 75, 'Alive': True, 'Favorite Foods': 'Cereal', 'Mustard', 'Onions'}
C. {"Name::"Bob Johnson", "Age": 75, "Alive":true, "Favorite Foods": ["Cereal", "Mustard", "Onions"]}
D. {Name: Bob Johnson, Age: 75, Alive: true, Favorite Foods: [Cereal, Mustard, Onions]}

Answer: C

NEW QUESTION # 585
Drag and drop the characteristics from the left onto the routing protocols they describes on the right.