Verified 1Z0-1079-20 dumps Q&As - Pass Guarantee or Full Refund [Jan-2022]
1Z0-1079-20 PDF Dumps | Jan 16, 2022 Recently Updated Questions
NEW QUESTION 27
If a Rate Record and a Rate Offering are configured with conflicting values in the same data elements, how does OTM address this?
- A. During planning, the user will have the option of indicating if OTM should prioritize either the Rate Offering or the Rate Record setting.
- B. The Rate Offering will take priority over the Rate Record configuration.
- C. The Rate Record will take priority over the Rate Offering configuration.
- D. Such a conflict cannot exist in OTM.
- E. OTM's planning engine will run the solver for both settings, but only consider the least cost result.
Answer: D
NEW QUESTION 28
Which three options are supported in Oracle Global Trade Management (GTM) when creating a Declaration?
(Choose three.)
- A. One Trade Transaction to many Declarations
- B. One Trade Transaction to one Declaration
- C. One Order Release to one Declaration
- D. Many Trade Transactions to one Declaration
- E. One Order Release to many Declarations
Answer: A,B,D
NEW QUESTION 29
Which two options must be defined for shipment planning? (Choose two.)
- A. Equipment
- B. Equipment Type
- C. Equipment Group
- D. Equipment Group Profile
- E. Equipment Class
Answer: A,B
NEW QUESTION 30
Which action can you use if you want Global Trade Management (GTM) to automatically determine and assign a license to a Trade Transaction?
- A. Reevaluate License
- B. Assign License
- C. Determine License
- D. Assign License Show Options
Answer: D
NEW QUESTION 31
When creating a new Declaration type in Global Trade Management (GTM), which three processes may need to be configured depending on the requirements of the local customs authority? (Choose three.)
- A. Define a constraint set with grouping criteria that identifies how to combine Trade Transactions into a Declaration.
- B. Set up a License Code that defines whether a license is incremented or decremented for the Trade Transaction.
- C. Create aggregation criteria that consolidate Transaction Lines, based on parameters such as tariff code or country of origin, into fewer lines on the final Declaration.
- D. Set up a data configuration that defines the data required to be copied from the Transaction onto the Declaration.
Answer: B,C,D
NEW QUESTION 32
Your customer has US and Germany orders.
How would you setup a User role with read/write access for US orders, and only read access for German orders?
- A. Access can be controlled via Access Control List and assign to User Role.
- B. Assign multiple User Role grants in User Role.
- C. Access can be controlled via VPD profile along with external Predicates.
- D. Assign multiple User Roles while creating User.
Answer: D
NEW QUESTION 33
Identify the incorrect option about the commodity setup.
- A. You can select transportation modes while defining a commodity.
- B. You can link commodity with equipment types while defining a new commodity.
- C. Incompatible commodities can be captured while defining a commodity.
- D. Specific temperature controls cannot be assigned while defining a commodity.
Answer: D
NEW QUESTION 34
Which statement is correct regarding the OTM Parameter Set?
- A. OTM allows only one Parameter Set, and it is stored in the PUBLIC domain.
- B. OTM allows more than one Parameter Set, but they must be stored in the PUBLIC domain.
- C. If you want to create a Parameter Set, you must name it "DEFAULT".
- D. There are less than 30 parameters that can be changed in the Default Parameter Set.
- E. Parameter Sets are mandatory during Bulk planning.
Answer: C
NEW QUESTION 35
At which three levels does Match Rules allow the Invoice Matching to occur? (Choose three.)
- A. Order line level
- B. Shipment Ship Unit line level
- C. Shipment location level
- D. Shipment Ship Unit level
- E. Shipment level
Answer: A,C,E
NEW QUESTION 36
Identify the option which cannot be performed by the Screen Set Manager.
- A. Create multi-panel layouts containing tables, maps, Gantt charts.
- B. Define default criteria for search fields.
- C. Customize the Results page columns.
- D. Customize the Actions menu.
Answer: A
NEW QUESTION 37
Which two statements about shipment statuses are true? (Choose two.)
- A. ENROUTE_UNLOADED PARTIAL - indicates that the shipment has reached the final destination and is in the process of being unloaded.
- B. ENROUTE_NOT STARTED - indicates that the shipment has not been picked up from the initial pickup stop yet.
- C. ENROUTE_ENROUTE - indicates that the shipment is moving from one location to another.
- D. ENROUTE_DIVERTED - indicates that the shipment was delayed in leaving the previous location due to the late pickup time, and will be late arriving to the destination location.
- E. ENROUTE_DELAYED - indicates that the shipment was unable to travel on the planned route, and has taken a detour.
Answer: B,C
NEW QUESTION 38
Your customer has implemented OTM and has a requirement to have a selected menu to be displayed separately.
How should you assign this to a user?
- A. It is a customization that OTM does not support.
- B. Assign it in User Preference and assign this preference to User.
- C. Assign it via Manage User Access.
- D. Assign it in User Role ID.
Answer: C
NEW QUESTION 39
Assume that you have made changes to the Default Parameter Set. Which statement is true?
- A. Regardless of your user role, you won't be able to save the changes within the Default Parameter Set without renaming it first.
- B. In order to reset all the changed settings back to their original settings, select "Actions", then "Utilities", and then "Set Defaults" from the drop-down menu.
- C. In order to reset all the changed settings back to their original settings, you should review them on the screen and be able to tell which ones have been changed, and what the default settings were.
- D. In order to reset all the changed settings back to their original settings, you should delete the Parameter Set and recreate it using the Default as your template.
Answer: A
NEW QUESTION 40
Which four of the following components make up a Compliance Rule in Global Trade Management (GTM)?
(Choose four.)
- A. Control Type
- B. Control Code
- C. Commerce Control List
- D. Regime
- E. Region
Answer: A,B,D,E
NEW QUESTION 41
When assigning rules to service providers to support Freight Payment, which two statements are true? (Choose two.)
- A. The rules cannot be changed once assigned to a service provider.
- B. One can assign a match rule profile and an approval rule profile to a service provider.
- C. The Autopay check box should be selected for the rules to apply.
- D. Each service provider can have only one match rule profile assigned.
Answer: C,D
NEW QUESTION 42
Select the two true statements about OTM Agents. (Choose two.)
- A. Agents can send alerts when a condition has occurred, and they can also create or change data objects.
- B. Agents can send alerts when a condition has occurred, but they cannot create or change data objects.
- C. Agents can be configured to run multiple times on a time-based schedule.
- D. Agents "listen" for a condition to occur.
Answer: B,C
NEW QUESTION 43
Which rate component defines how transportation time will be calculated for the Rate?
- A. Rate Lane
- B. Rate Distance
- C. Rate Service
- D. Rate Offering
- E. Rate Record
Answer: B
NEW QUESTION 44
Which three statements are true when configuring allocation rules for OTM Freight Payment? (Choose three.)
- A. One cannot use the same rule in more than one allocation rule profile.
- B. For a service provider, one can assign one allocation rule based on the planned cost and another based on the actual cost.
- C. The allocation rules in the profile can be sequenced in the allocation rule profile.
- D. OTM uses the first allocation rule that applies.
- E. Allocation rules need to be set up before the allocation rule profiles.
Answer: B,D,E
NEW QUESTION 45
Which option represents Original Invoice Cost field at Shipment?
- A. Total Approved Cost on a sell Shipment
- B. Contains the initial invoice amount adjusted by any additional charges or invoices that the carrier later sent to you
- C. The Initial invoice amount received from the carrier
- D. Total Actual Cost minus the rebate amount as defined in the Secondary Charge Rules
Answer: C
NEW QUESTION 46
When a new Service Provider is created, OTM automatically does which of the following?
- A. OTM associates the Service Provider calendar with the calendar of the CORPORATION ID identified during setup.
- B. OTM sends an email or fax to the Service Provider contact, depending on the contact's preferred contact method.
- C. OTM assigns the default Calendar defined in the Parameter Set.
- D. OTM creates a corresponding LOCATION, with the location Role of "CARRIER".
Answer: C
NEW QUESTION 47
In the process of "Adjust shipment cost scenario," you select "reversing and adjusting" Shipment cost.
What will be performed by OTM?
- A. The system reverses a cost by creating a new cost with a negative amount that matches the amount of the original cost.
- B. The system creates a new cost that negates the original cost. Then it creates another new cost with the new cost value.
- C. The system gives the user an option to update the amount.
- D. The system takes the original cost and adds or subtracts an amount to it to create the new cost.
Answer: A
NEW QUESTION 48
Which business object do you use to set up the details of the classification data that you want to download and configure how it is mapped from the content provider's data to the Global Trade Management (GTM) data structure?
- A. Data Load Type
- B. Content Source
- C. External System
- D. Product Classification Category
Answer: C
NEW QUESTION 49
......
How to book the Oracle 1Z0-1079-20: Oracle SCM Transportation and Global Trade Management Cloud 2020 Implementation Essentials Exam
You can schedule the exam anytime at Pearson VUE. You can pay directly from a credit card or redeem a voucher purchased from Oracle.
1Z0-1079-20 Exam Questions – Valid 1Z0-1079-20 Dumps Pdf: https://ensurepass.testkingfree.com/Oracle/1Z0-1079-20-practice-exam-dumps.html