Accurate & Verified 2023 New NSE5_FAZ-7.0 Answers As Experienced in the Actual Test!
NSE5_FAZ-7.0 Certification Sample Questions certification Exam
Fortinet NSE5_FAZ-7.0 exam covers a variety of topics, including FortiAnalyzer 7.0 system settings, logs, and reports. NSE5_FAZ-7.0 exam also covers the configuration and management of FortiAnalyzer 7.0, including data collection, event management, and report generation. Candidates will also be tested on their knowledge of FortiAnalyzer 7.0's integration with other Fortinet products, such as FortiGate, FortiManager, and FortiSIEM.
NEW QUESTION # 56
Which two statements are true regarding FortiAnalyzer operating modes? (Choose two.)
- A. Collector mode is the default operating mode.
- B. When in collector mode. FortiAnalyzer supports event management and reporting features.
- C. When in collector mode, FortiAnalyzer collects logs from multiple devices and forwards these logs in the original binary format.
- D. By deploying different FortiAnalyzer devices with collector and analyzer mode in a network, you can improve the overall performance of log receiving, analysis, and reporting
Answer: C,D
Explanation:
Reference:
https://docs.fortinet.com/document/fortianalyzer/7.0.0/administration-guide/312644/analyzer-collector-collaboration
NEW QUESTION # 57
On FortiAnalyzer, what is a wildcard administrator account?
- A. An account that permits access to members of an LDAP group
- B. An account that requires two-factor authentication
- C. An account that validates against any user account on a FortiAuthenticator
- D. An account that allows guest access with read-only privileges
Answer: A
Explanation:
https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/747268/configuring-wildcard-admin-accounts
NEW QUESTION # 58
View the exhibit.
What does the data point at 14:35 tell you?
- A. FortiAnalyzer is dropping logs.
- B. FortiAnalyzer is indexing logs faster than logs are being received.
- C. The sqlplugind daemon is ahead in indexing by one log.
- D. FortiAnalyzer has temporarily stopped receiving logs so older logs' can be indexed.
Answer: B
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/47690/insert-rate-vs-receive-rate-widget
NEW QUESTION # 59
Which statements are correct regarding FortiAnalyzer reports? (Choose two)
- A. FortiAnalyzer includes pre-defined reports only.
- B. FortiAnalyzer provides the ability to create custom reports.
- C. FortiAnalyzer allows reporting for FortiGate devices only.
- D. FortiAnalyzer glows you to schedule reports to run.
Answer: B,D
NEW QUESTION # 60
What statements are true regarding disk log quota? (Choose two)
- A. The FortiAnalyzer can overwrite the oldest logs or stop logging once the disk log quota is met.
- B. The FortiAnalyzer stops logging once the disk log quota is met.
- C. The FortiAnalyzer automatically sets the disk log quota based on the device.
- D. The FortiAnalyzer disk log quota is configurable, but has a minimum o 100mb a maximum based on the reserved system space.
Answer: A,D
NEW QUESTION # 61
How are logs forwarded when FortiAnalyzer is using aggregation mode?
- A. Logs and content files are forwarded as they are received.
- B. Logs and content files are stored and uploaded at a scheduled time.
- C. Logs are forwarded as they are received.
- D. Logs are forwarded as they are received and content files are uploaded at a scheduled time.
Answer: B
Explanation:
https://www.fortinetguru.com/2020/07/log-forwarding-fortianalyzer-fortios-6-2-3/
https://docs.fortinet.com/document/fortianalyzer/6.2.0/administration-guide/420493/modes
NEW QUESTION # 62
What FortiView tool can you use to automatically build a dataset and chart based on a filtered search result?
- A. Dataset Library
- B. Export to Report Chart
- C. Chart Builder
- D. Custom View
Answer: B
NEW QUESTION # 63
Which statements are true regarding securing communications between FortiAnalyzer and FortiGate with SSL? (Choose two.)
- A. SSL is the default setting.
- B. FortiAnalyzer encryption level must be equal to, or higher than, FortiGate.
- C. SSL encryption levels are globally set on FortiAnalyzer.
- D. SSL communications are auto-negotiated between the two devices.
- E. SSL can send logs in real-time only.
Answer: A,C
NEW QUESTION # 64
You need to upgrade your FortiAnalyzer firmware.
What happens to the logs being sent to FortiAnalyzer from FortiGate during the time FortiAnalyzer is temporarily unavailable?
- A. Logs are dropped
- B. FortiGate uses the miglogd process to cache the logs
- C. FortiAnalyzer uses log fetching to retrieve the logs when back online
- D. The logfiled process stores logs in offline mode
Answer: B
NEW QUESTION # 65
Which statements are true of Administrative Domains (ADOMs) in FortiAnalyzer? (Choose two.)
- A. All administrators can create ADOMs--not just the admin administrator.
- B. ADOMs constrain other administrator's access privileges to a subset of devices in the device list.
- C. Once enabled, the Device Manager, FortiView, Event Management, and Reports tab display per ADOM.
- D. ADOMs are enabled by default.
Answer: B,C
NEW QUESTION # 66
View the exhibit:
What does the 1000MB maximum for disk utilization refer to?
- A. The disk quota for all devices in the ADOM
- B. The disk quota for each device in the ADOM
- C. The disk quota for the FortiAnalyzer model
- D. The disk quota for the ADOM type
Answer: A
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.0/administration-guide/743670/configuring-log-storage-policy
NEW QUESTION # 67
Which SQL query is in the correct order to query the database in the FortiAnslyzer?
- A. SELECT devid FROM Slog GROOP BY devid WHERE * user' =* USERl'
- B. SELECT devid WHERE 'u3er'='USERl' FROM $ log GROUP BY devid
- C. SELECT devid FROM Slog- WHERE *user' =' USERl' GROUP BY devid
- D. FROM Slog WHERE 'user* =' USERl' SELECT devid GROUP BY devid
Answer: C
Explanation:
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 259: The main clauses FortiAnalyzer reports use are as follows:
* FROM
* WHERE
* GROUP BY
* ORDER BY
* LIMIT
* OFFSET
Accordingly, following the SELECT keyword, the statement must be followed by one or more clauses in the order in which they appear in the table shown on this slide.
NEW QUESTION # 68
What is the purpose of employing RAID with FortiAnalyzer?
- A. To back up your logs
- B. To separate analytical and archive data
- C. To introduce redundancy to your log data
- D. To provide data separation between ADOMs
Answer: C
Explanation:
https://en.wikipedia.org/wiki/RAID#:~:text=RAID%20(%22Redundant%20Array%20of%20Inexpensive,%2C%20performance%20improvement%2C%20or%20both.
NEW QUESTION # 69
What statements are true regarding FortiAnalyzer 's treatment of high availability (HA) dusters? (Choose two)
- A. FortiAnalyzer receives bgs only from the primary device in the cluster.
- B. FortiAnalyzer only needs to know (he serial number of the primary device in the cluster-it automaticaly discovers the other devices.
- C. FortiAnalyzer receives logs from d devices in a duster.
- D. FortiAnalyzer distinguishes different devices by their serial number.
Answer: C,D
NEW QUESTION # 70
You crested a playbook on FortiAnalyzer that uses a FortiOS connector
When configuring the FortiGate side, which type of trigger must be used so that the actions in an automation stitch are available in the FortiOS connector?
- A. FortiAnalyzer Event Handler
- B. Incoming webhook
- C. FortiOS Event Log
- D. Fabric Connector event
Answer: D
NEW QUESTION # 71
Why should you use an NTP server on FortiAnalyzer and all registered devices that log into FortiAnalyzer?
- A. To properly correlate logs
- B. To improve DNS response times
- C. To use real-time forwarding
- D. To resolve host names
Answer: A
NEW QUESTION # 72
If you upgrade the FortiAnalyzer firmware, which report element can be affected?
- A. Report scheduling
- B. Output profiles
- C. Report settings
- D. Custom datasets
Answer: D
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/upgrade-guide/669300/checking-reports
NEW QUESTION # 73
How does FortiAnalyzer retrieve specific log data from the database?
- A. SQL FROM statement
- B. SQL EXTRACT statement
- C. SQL SELECT statement
- D. SQL GET statement
Answer: A
Explanation:
https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/137bb60e-ff37-11e8-8524-f8bc1258b856/fortianalyzer-fortigate-sql-technote-40-mr2.pdf
NEW QUESTION # 74
For proper log correlation between the logging devices and FortiAnalyzer, FortiAnalyzer and all registered devices should:
- A. Use real-time forwarding
- B. Use host name resolution
- C. Use DNS
- D. Use an NTP server
Answer: D
NEW QUESTION # 75
By default, what happens when a log file reaches its maximum file size?
- A. FortiAnalyzer rolls the active log by renaming the file.
- B. FortiAnalyzer stops logging.
- C. FortiAnalyzer overwrites the log files.
- D. FortiAnalyzer forwards logs to syslog.
Answer: A
NEW QUESTION # 76
On the RAID management page, the disk status is listed as Initializing.
What does the status Initializing indicate about what the FortiAnalyzer is currently doing?
- A. FortiAnalyzer is functioning normally
- B. FortiAnalyzer is writing to all of its hard drives to make the array fault tolerant
- C. FortiAnalyzer is ensuring that the parity data of a redundant drive is valid
- D. FortiAnalyzer is writing data to a newly added hard drive to restore it to an optimal state
Answer: B
Explanation:
Reference:
8977-00505692583a/FortiAnalyzer-5.6.10-Administration-Guide.pdf (40)
NEW QUESTION # 77
A play book contains five tasks in total. An administrator executed the playbook and four out of five tasks finished successfully, but one task failed. What will be the status of the playbook after its execution?
- A. Running
- B. Success
- C. Failed
- D. Upstream_failed
Answer: C
Explanation:
Playbook jobs that include one or more failed tasks are labeled as Failed in Playbook Monitor. FortiAnalyzer_7.0_Study Guide page No: 247 Playbook jobs that include one or more failed tasks are labeled as Failed in Playbook Monitor. A failed status, however, does not mean that all tasks failed. Some individual actions may have been completed successfully.
NEW QUESTION # 78
For which two SAML roles can the FortiAnalyzer be configured? (Choose two.)
- A. Identity collector
- B. Service provider
- C. Identity provider
- D. Principal
Answer: B,C
Explanation:
Reference:
20the%20identity%20provider%20(IdP,external%20identity%20provider%20is%20available.
https://docs.fortinet.com/document/fortianalyzer/6.2.0/administration-guide/981386/saml-admin-authentication
NEW QUESTION # 79
You crested a playbook on FortiAnalyzer that uses a FortiOS connector
When configuring the FortiGate side, which type of trigger must be used so that the actions in an automation stitch are available in the FortiOS connector?
- A. FortiAnalyzer Event Handler
- B. Incoming webhook
- C. FortiOS Event Log
- D. Fabric Connector event
Answer: B
Explanation:
"One possible scenario is shown on the slide:
1. Traffic flows through the FortiGate
2. FortiGate sends logs to FortiAnalyzer
3. FortiAnalyzer detects some suspicious traffic and generates an event
4. The event triggers the execution of a playbook in FortiAnalyzer, which sends a webhook call to FortiGate so that it runs an automation stitch
5. FortiGate runs the automation stitch with the corrective or preventive actions" FortiAnalyzer_7.0_Study_Guide-Online page 228 In order to see the actions related to the FOS connector, you must enable an automation rule using the Incoming Webhook Call trigger on the FortiGate side. FortiAnalyzer_7.0_Study Guide page no 233
NEW QUESTION # 80
......
Certification Topics of NSE5_FAZ-7.0 Exam PDF Recently Updated Questions: https://ensurepass.testkingfree.com/Fortinet/NSE5_FAZ-7.0-practice-exam-dumps.html